Resources Directory

ProSew Tarp and Awning 
Authorized EZ Snap installer for Vernon BC and the North Okanagan. ProSew Tarp and Awning is your exterior shading expert for the Vernon, BC area.  Vernon BC Canada. ProSew Tarp and Awning also carries a full line of awnings and roll down patio shades. ProSew Tarp and Awning also carries a large selection of Tarps and Tarpaulins. They can make you a custom vinyl tarp or canvas tarpaulins to your exact specifications, or they also carry a large inventory of Heavy Duty poly tarps. ProSew also specializes in custom sewing fabrications and industrial sewing repairs. Their full service sewing shop can custom made shade curtains for your home and patio.

Budget Blinds USA
Budget Blinds provides custom window treatments, blinds, shutters, shades and draperies, plus exterior window shades, for your home or RV.  Call us today for professional window covering installations.

Budget Blinds Canada
Window Coverings, Shutters, Shades, Outdoor Blind Installation

EZ Snap Demo Video
Watch and see how anyone can successfully install their own EZ Snap shades, quickly and affordably

Place approximately 12 inches apart on the lens of the skylight.

AirFlo™ Spacers are recommended for all Dome Skylights or Skylights with Plastic Lens.

To use: Place the spacers approximately 12 inches apart or how every many
would be required to keep the mesh from laying on the skylight lens.

Why do we suggest the AirFlo Spacers: Many dome skylights are quality, "Made in America" skylights, but unfortunately there are
a lot of skylights on the market now that are made off-shore. In very hot weather, these poorly made skylight lens can develop crazing or imperfections in the
plastic of the skylight lens. This is caused by an excessive heat build-up in the sub-standard plastic lens.
The AirFlo™ spacers lift the shading mesh off of the lens of the skylight, allowing the excess heat to dissipate.

NOTE: Using AirFlo Spacers will slightly increase the size of the dimensions of the shading mesh you will need.

If you are confident that you have a quality built dome skylight, then these spacers
are probably not necessary for your project, but if you are unsure, better to be safe than sorry.

Outside View Black EZ Snap Shade Screens

OUTSIDE VIEW - BLACK EZ Snap Shade Screens.

INSIDE VIEW - BLACK EZ Snap Shade Screens

Outside View White EZ Snap Shade Screens

OUTSIDE VIEW - WHITE EZ Snap Shade Screens

Inside View White EZ Snap Shade Screens

INSIDE VIEW - WHITE EZ Snap Shade Screens

The Primer Pen is used for applications where it is necessary to increase the surface adhesion of the EZ Snap stud.

Contains a 3M Clear, Colorless primer. Enough to prime the surface area for approximately 50 studs.

To use: Shake the pen well before using.
A gentle squeeze 1″ in from the felt tip, ruptures the inner membrane, allowing the contents to be easily dispensed.
Apply a thin, uniform coating to the bonding surface using the minimum amount that will fully coat the surface.
Dries clear. Allow to dry thoroughly before applying the studs. This takes approximately 5 minutes at room temperature.
Extremely porous surfaces may need a second application for uniform coverage and good adhesion.

TIP: Make a template, cut-out to the same size as the stud.
This prevents wasting primer by only priming the area that the stud will bond to.
**As with all primer type products, test on small area first to ensure it is compatible with surface.