23 inch Skylight Shade Kit

$68.95 $49.95

23 inch’ Kit includes:
– 23 inch x 6′ piece of EZ Snap™ SunScreen
– 20 x Snap Sets (Stud, pin & cap)
– 1 x FREE Removal Tool & Layout Pencil when one or more kits are ordered.
Click for info on the types EZ Snap fasteners
Use on Windows, Skylights, Boats & R.V.s
**All Prices are in US funds.
*For Domed Skylights remember to add AIRFLO™ Spacers to your order.

334 in stock

  • Use for all 2 Ft Window Shade Kits
  • Select from the Options Below

  • Stud Type

    Install Tip: Use the 3M Adhesive Studs for skylight installs, not the screw in studs.
  • Shading Mesh Color

    All the colors will block the same 90% of heat and damaging U.V. light. BLACK: Provides the best visibility when looking through to the outside. Because it is a neutral color, it is the most popular for house windows. WHITE and BEIGE: Provide the most daytime privacy from the outside and are most popular for Skylights and RV windows.
  • Holding Power Required

    IMPORTANT!! - Use the (5 inch HEAVY DUTY) option for windows over 25 Sq/Ft, or High Wind areas. Calculate how many fastener sets you will need for your project. BETTER TO HAVE A FEW EXTRA SETS, INSTEAD OF NOT ENOUGH! Order extra fasteners in the accessories section of the store if required.
  • Free Items Included

  • $0.00
SKU: 23 Inch Skylight Shading KIT Category: Tags: ,

Description

23 inch Kit includes:
– 23 inch x 6′ piece of EZ Snap™ SunScreen
– 20 x Snap Sets (Stud, pin & cap)
– 1 x FREE Removal Tool & Layout Pencil when one or more kits are ordered.
Click for info on the types EZ Snap fasteners
Use on Windows, Skylights, Boats & R.V.s
**All Prices are in US funds.
*For Domed Skylights remember to add AIRFLO™ Spacers to your order.

You may also like…

Place approximately 12 inches apart on the lens of the skylight.

AirFlo™ Spacers are recommended for all Dome Skylights or Skylights with Plastic Lens.

To use: Place the spacers approximately 12 inches apart or how every many
would be required to keep the mesh from laying on the skylight lens.

Why do we suggest the AirFlo Spacers: Many dome skylights are quality, "Made in America" skylights, but unfortunately there are
a lot of skylights on the market now that are made off-shore. In very hot weather, these poorly made skylight lens can develop crazing or imperfections in the
plastic of the skylight lens. This is caused by an excessive heat build-up in the sub-standard plastic lens.
The AirFlo™ spacers lift the shading mesh off of the lens of the skylight, allowing the excess heat to dissipate.

NOTE: Using AirFlo Spacers will slightly increase the size of the dimensions of the shading mesh you will need.

If you are confident that you have a quality built dome skylight, then these spacers
are probably not necessary for your project, but if you are unsure, better to be safe than sorry.

Outside View Black EZ Snap Shade Screens

OUTSIDE VIEW - BLACK EZ Snap Shade Screens.

INSIDE VIEW - BLACK EZ Snap Shade Screens

Outside View White EZ Snap Shade Screens

OUTSIDE VIEW - WHITE EZ Snap Shade Screens

Inside View White EZ Snap Shade Screens

INSIDE VIEW - WHITE EZ Snap Shade Screens

The Primer Pen is used for applications where it is necessary to increase the surface adhesion of the EZ Snap stud.

Contains a 3M Clear, Colorless primer. Enough to prime the surface area for approximately 50 studs.

To use: Shake the pen well before using.
A gentle squeeze 1″ in from the felt tip, ruptures the inner membrane, allowing the contents to be easily dispensed.
Apply a thin, uniform coating to the bonding surface using the minimum amount that will fully coat the surface.
Dries clear. Allow to dry thoroughly before applying the studs. This takes approximately 5 minutes at room temperature.
Extremely porous surfaces may need a second application for uniform coverage and good adhesion.

TIP: Make a template, cut-out to the same size as the stud.
This prevents wasting primer by only priming the area that the stud will bond to.
**As with all primer type products, test on small area first to ensure it is compatible with surface.