Block The Heat,
Not The View.
Exterior window sun shades for boat and yacht windows — cabin glass, helm and windshields. EZ Snap® Thermo Weave™ snaps flat over the glass and blocks up to 90% of the heat, with no drilling into the gelcoat.
Cabin glass takes the full sun.
At anchor or in the slip, the saloon and helm windows take the sun all day and the cabin turns into an oven. Interior curtains only trap that heat against the glass. An exterior solar screen stops it on the outside of the window — the U.S. Department of Energy rates exterior shading the most effective way to cut solar heat gain — so the cabin stays usable.
The studs bond to the frame or gelcoat with 3M™ VHB, so there's no drilling into the hull — and it snaps off when you're ready to get underway.
Up to 90% figure: EZ Snap® Thermo Weave spec (black mesh). Exterior-shading effectiveness per the U.S. Department of Energy.
Cruiser, sailboat or trawler — every cabin window, any shape.
Cabin window shadesExpress CruisersShades the wraparound cabin glass that turns the saloon into an oven at the dock.Build your shade
Marine window shadesSailboatsSnaps over companionway and port-light glass; comes off before you cast off.Build your shade
Yacht window shadesFlybridge & Motor YachtsKeeps the helm and saloon cool without drilling into the gelcoat.Build your shade
Boat windshield shadeTrawlers & DowneastCut to fit the big pilothouse windshield and side glass — any shape.Build your shade
Black for heat. White for the view.
Black mesh
Up to ~90% blockedMaximum heat and glare control — best for a hot helm or saloon.
White mesh
More open weaveKeeps the cabin brighter and the outward view more open.
Two ways to buy. Pick the one that fits the job.
Ready-made precuts with the snaps in the box, or a 6 ft roll you cut to fit.
Precut shades. Snaps in the box.
Twenty fixed Thermo Weave sizes with the right snaps already included — trim to fit your window. From $24.99.
6 ft rolls. Cut your own.
Bulk 6 ft-wide Thermo Weave in six lengths — cut any shape. Complete kits (roll + snaps) from $79.98; roll alone for less.
Is this a cabin shade or a bimini?
It's an exterior shade for the boat's windows — cabin glass, helm windows and windshields. It is not a bimini, canopy or cockpit cover; it snaps flat over the glass to keep heat and glare out of the cabin.
Will it drill into the hull or gelcoat?
No. The studs bond to the frame or gelcoat around the glass with 3M™ VHB — no screws, no holes, and nothing that damages the finish.
Can I take it off when I'm underway?
Yes. Unsnap the mesh and stow it; the studs stay put, so you snap it back at the dock or anchor. No tools.
Black or white mesh for a boat?
Black blocks up to ~90% of the heat and glare — best for a hot helm or cabin. White is a more open weave for a brighter cabin and more outward view.
Does it fit windshields and odd-shaped cabin windows?
Yes. The 6 ft-wide mesh is cut to fit any window shape — wraparound windshields, port lights and cabin glass.
Cool the cabin.
Measure the cabin glass, pick your mesh, and snap it on. Comes off when you cast off.