RV skirting that snaps on.
Seal the gap under any rig with solid Diamond Weave vinyl panels, cut to fit with household scissors and held on by patented no-drill snaps. No holes in your RV, no contractor, no markup. Keep the cold out in winter, then unsnap it and roll it up when you travel.
Complete kits run $899 to $2,099, custom-built to your rig. The kit builder prices yours as you configure.
One kit, cut to fit any rig.
Cut to your rig, not a stock size.
Every rig is a little different, so nothing is pre-sized. You measure your RV, then trim the Diamond Weave panels to your exact height and length with household scissors, around slide-outs, steps, and storage bays. The panels are a solid, opaque vinyl built for extreme cold, so they hold their shape against wind and weather season after season.
No drilling. Snaps off for travel.
The patented snap studs press on with 3M VHB adhesive, about 60 seconds each, and reach full strength in roughly 72 hours. No screws, no holes, nothing that marks your rig. When you hit the road, unsnap the panels and roll them up, and the studs stay put so the skirt snaps right back on at the next site. Cut clean openings for your steps and utility bays and finish them with more snaps.
RV skirting,
answered.
What is RV skirting and how does it work?
RV skirting closes the open gap between the bottom of your rig and the ground. By sealing that space it traps a still cushion of air so wind cannot strip the heat away in winter, which keeps the temperature under your rig more stable and helps protect your tanks and plumbing. EZ Snap does it with solid Diamond Weave vinyl panels held on by patented no-drill snaps.
Do I need to drill into my RV?
No, and that is the whole point. The snap studs use 3M VHB adhesive that presses on by hand and reaches full strength in about 72 hours. There are no screws and no holes, and nothing that marks your rig. When you travel, the panels unsnap and the studs stay put.
Will it fit my rig?
Yes. Nothing is pre-sized. You enter your dimensions in the kit builder and it prices a kit with enough material for your rig, then you cut the panels to fit with household scissors, around slide-outs, steps, and bays. Not sure of your size? Order a free sample or talk to a Pro before you buy.
How much does an RV skirting kit cost?
Complete EZ Snap kits run from $899 to $2,099, priced by how much material your rig needs. A shorter single-level trailer sits toward the lower end, while a tall fifth wheel or a full Class A takes more. Everything is covered by a Limited Lifetime materials warranty and ships free over $225.
How much can it save on heating?
Owners report up to 40% less heating and propane use once the full perimeter is sealed. The front and the corners matter as much as the long walls, so a complete seal is what does the work.
Can I take it off and reuse it?
Yes. The panels unsnap from the studs so you can pull the whole skirt, roll it up, and store it, then snap it back on next season. The studs stay on the rig between stops, so re-hanging takes nothing but the panels you already own.
Build your kit, cut to fit.
Enter your rig's dimensions and the kit builder prices yours. Cut it to fit, snap it on with no drilling, and seal the gap for good.