Frozen pipes start under the floor.
When the cold sets in, it comes up through your floor and freezes your pipes first. An open underbelly lets the wind strip the heat away all night long. EZ Snap skirting seals it shut with solid Diamond Weave vinyl, cut to fit with household scissors and snapped on with no drilling. See the material for yourself before you commit.
Why 38,000 RVers seal the gap.
An open underbelly costs you all winter.
Leave the gap open and the wind pulls the heat off your floor, your tanks, and your plumbing every night. Your furnace runs harder, your propane bill climbs, and the floor never really warms up. A single frozen line can end a trip. Skirting closes the gap so a still cushion of air forms under the rig and the heat you are paying for actually stays put.
Seal it yourself, no drilling.
You press on the patented 3M VHB snap studs, about 60 seconds each, cut the Diamond Weave to fit with household scissors, and snap it on. No holes in your rig, no contractor, and you work at your own pace. When spring comes, unsnap it, roll it up, and store it, and the studs stay on for next winter. Complete kits run $899 to $2,099, built to your rig.
Winter skirting,
answered.
Will it really keep my pipes from freezing?
Skirting seals the space rather than heating it. By closing the open underbelly it traps a still cushion of air so wind cannot strip the heat away, which keeps the temperature under your rig far more stable and buys your tanks and plumbing a real margin against a freeze, especially paired with your tank heaters or a heat source.
How much can it save on heating?
Owners report up to 40% less heating and propane use once the full perimeter is sealed. The front and the corners matter as much as the long walls, so a complete seal is what does the work.
Can I really install it myself?
Yes. There is no drilling and no power tools. You press on the adhesive snap studs, cut the panels with household scissors, and snap them on, solo or with one helper, at your own pace across a session or two.
Can I see the material before I buy?
Yes. Order a free sample and we will send you a piece of the Diamond Weave so you can feel the weight and see the color before you build a kit. It is the easiest way to know it is right for your rig.
How much does a kit cost?
Complete EZ Snap kits run from $899 to $2,099, priced by how much material your rig needs. The kit builder prices yours as you enter your dimensions. Everything is covered by a Limited Lifetime materials warranty and ships free over $225.
See it, then seal it.
Order a free sample and see the Diamond Weave for yourself. When you are ready, the kit builder prices yours to your rig, cut to fit and snapped on with no drilling.