How can we help you?

< Back to Previous Page
You are here:

Cap Placement

EZ Snap Caps & PinsPlace Caps over Pins and press down towards the base of the Pin, as far possible.

Locking Mechanism

You should hear the teeth on the Cap clicking as you press Caps down toward the base of each Pin. Once Pins and Caps are locked together, they should never be taken apart again. Pins and Caps should stay permanently locked onto Shade Mesh.

IMPORTANT: Do not pry apart Caps and Pins. This will permanently damage the Fastener.

Was this article helpful?
How can we improve this article?
Please submit the reason for your vote so that we can improve the article.
Need help?

1 Comment

  1. EZ Snap Caps and Pins are designed to stay together permanently after they are installed on the Shade Mesh or RV Skirting. The locking parts work in a similar fashion to a zip tie.

    Some customers are able to release the small locking lever inside the Cap and pry the Cap off of the Pin; however, the tiny locking mechanism inside the Cap may break in the process.

    It is possible to put a drop of Super Glue in the hole in the Cap to make sure the Pin and Cap stay together after reinstallation.

Table of Contents