EZSnap Exterior Window Sun Shades

Exterior Window Shades

The new EZ Snap® fasteners now allow you to install exterior window shades for your home’s windows and skylights quickly, easily and with professional looking results. Our optical grade exterior sun shades, installed on your home, will pay for themselves in reduced air…

EZSnap Skylight Sun Shades

Exterior Skylight Shades

Using the EZ-Snap® fastening system, you can install skylight solar shades and skylight blinds for all sizes and makes including Velux skylights. Install your own professionally looking exterior skylight shades in minutes and protect your house from the sun with Heat blocking exterior skylight blinds…

EZ Snap RV Skirting & Fifth Wheel Hitch Enclosures

RV Skirting & 5th Wheel Enclosure Kits

RV skirting for your motorhome or RV is now a “Do-it-Yourself” project when you use the new EZ Snap® RV Skirting system Gone are the days of having to hire an upholster to come to your R.V. and custom fit your RV Skirting (Very Expensive). But now using the EZ Snap® fasteners you can install your own RV Skirting and…

EZSnap RV Window Sun Shades

RV Window Shades

Before EZ Snap®; if you wanted to have custom fit RV shade screens for your motorhome or RV, you would have to hire a professional to come out to your location and fit them on your unit. Now, you can install them yourself, for substantially less money and achieve the same professional results…

EZ Snap Yacht & Boat Window Shades

Boat & Yacht Shades

EZ Snap® Boat & Yacht solar shades are the ideal way to keep the heat out, but still have your view. These exterior solar blinds have the added benefit of giving you privacy while your boat is moored. Even though you can see through the shading mesh just fine from inside the boat’s cabin, people on the outside can not see in…

Place approximately 12 inches apart on the lens of the skylight.

AirFlo™ Spacers are recommended for all Dome Skylights or Skylights with Plastic Lens.

To use: Place the spacers approximately 12 inches apart or how every many
would be required to keep the mesh from laying on the skylight lens.

Why do we suggest the AirFlo Spacers: Many dome skylights are quality, "Made in America" skylights, but unfortunately there are
a lot of skylights on the market now that are made off-shore. In very hot weather, these poorly made skylight lens can develop crazing or imperfections in the
plastic of the skylight lens. This is caused by an excessive heat build-up in the sub-standard plastic lens.
The AirFlo™ spacers lift the shading mesh off of the lens of the skylight, allowing the excess heat to dissipate.

NOTE: Using AirFlo Spacers will slightly increase the size of the dimensions of the shading mesh you will need.

If you are confident that you have a quality built dome skylight, then these spacers
are probably not necessary for your project, but if you are unsure, better to be safe than sorry.

Outside View Black EZ Snap Shade Screens

OUTSIDE VIEW - BLACK EZ Snap Shade Screens.

INSIDE VIEW - BLACK EZ Snap Shade Screens

Outside View White EZ Snap Shade Screens

OUTSIDE VIEW - WHITE EZ Snap Shade Screens

Inside View White EZ Snap Shade Screens

INSIDE VIEW - WHITE EZ Snap Shade Screens

The Primer Pen is used for applications where it is necessary to increase the surface adhesion of the EZ Snap stud.

Contains a 3M Clear, Colorless primer. Enough to prime the surface area for approximately 50 studs.

To use: Shake the pen well before using.
A gentle squeeze 1″ in from the felt tip, ruptures the inner membrane, allowing the contents to be easily dispensed.
Apply a thin, uniform coating to the bonding surface using the minimum amount that will fully coat the surface.
Dries clear. Allow to dry thoroughly before applying the studs. This takes approximately 5 minutes at room temperature.
Extremely porous surfaces may need a second application for uniform coverage and good adhesion.

TIP: Make a template, cut-out to the same size as the stud.
This prevents wasting primer by only priming the area that the stud will bond to.
**As with all primer type products, test on small area first to ensure it is compatible with surface.