5th Wheel Front Hitch Enclosure RV Skirting Kit

$559.99 $399.95

25′ Kit includes …FREE SHIPPING…
– 25′ x 71 inch tall EZ Snap® Premium RV Skirting
– 3 Snap Fastener Options
– 4 Colors available
– Optional Zipper Door
– 10 Feet of Gecko Velcro™ to join the enclosure to side skirting.
– 1 x FREE Removal Tool
** All Prices are in US funds **
IMPORTANT: Only install your enclosure kit when you also have side skirting installed. Without side skirting, wind can cause a parachuting effect behind the enclosure kit and potentially cause fastener failure.

Click Video Below for More Info:

857 in stock

SKU: 25 FOOT 5TH WHEEL ENCLOSURE RV SKIRTING KIT Categories: , , Tag:

25' Kit includes ...FREE SHIPPING...
- 25' x 71 inch tall EZ Snap® Premium RV Skirting
- 4 Colors Available
- 3 Snap Fastener Options
- Optional Zipper Door
- 10 Feet of Gecko Velcro™ to join the enclosure to side skirting
- 1 x FREE Removal Tool when one or more kits are ordered
** All Prices are in US funds **
IMPORTANT: Only install your enclosure kit when you also have side skirting installed. Without side skirting, wind can cause a parachuting effect behind enclosure kit and potentially cause fastener failure.

Still Have Questions ?
Learn More Below

How to Install RV Skirting Video

What Size Kit will I need?

How Much Will It Cost?

Try our quick RV Skirting Kit Size Calculator Tool here… 

EZ Snap® Reviews

“The skirting is very high quality… Even with high winds it held up to the winter conditions.” Jason Halls

EZ Snap® Reviews

“What a GREAT product. Installation video is EXCELLENT!” Douglas

EZ Snap® Reviews

“…skirting really helped on heating costs when temperatures were below freezing. Heartily recommend the ezsnap products.” John King

EZ Snap® Reviews

“The skirt and snaps held up through a very cold winter with some severe wind storms and even then no snaps pulled off!” Jeanette Van Dijk

The Primer Pen is used for applications where it is necessary to increase the surface adhesion of the EZ Snap stud.

Contains a 3M Clear, Colorless primer. Enough to prime the surface area for approximately 50 studs.

To use: Shake the pen well before using.
A gentle squeeze 1″ in from the felt tip, ruptures the inner membrane, allowing the contents to be easily dispensed.
Apply a thin, uniform coating to the bonding surface using the minimum amount that will fully coat the surface.
Dries clear. Allow to dry thoroughly before applying the studs. This takes approximately 5 minutes at room temperature.
Extremely porous surfaces may need a second application for uniform coverage and good adhesion.

TIP: Make a template, cut-out to the same size as the stud.
This prevents wasting primer by only priming the area that the stud will bond to.
**As with all primer type products, test on small area first to ensure it is compatible with surface.