10′ Kit includes:
– 10 Feet of EZ Snap® Premium RV Skirting
– 2 Height Options: 46 or 60 inches tall
– 3 Snap Fastener Options
– 4 Colors Available: White, Black, Grey or Beige
– Gecko Velcro™ for one access point
– 1 FREE Removal Tool when one or more kits are ordered **All Prices are in US funds**
- 10 Feet of EZ Snap® Premium RV Skirting – 2 Height Options: 46 or 60 inches tall - 3 Snap Fastener Options - 4 Colors Available: White, Black, Grey or Beige - Gecko Velcro™ for one access point - 1 FREE Removal Tool when one or more kits are ordered **All Prices are in US funds** ** NOTE (Skirting Length): When inventory levels are low for the skirting color you ordered, EZ Snap® may supply your skirting length in 2 or 3 professionally joined sections using our Gecko Velcro™ (at no extra charge). This will give you one continuous length of skirting to work with, but with the added benefit of access points in the location of these joins.
The Primer Pen is used for applications where it is necessary to increase the surface adhesion of the EZ Snap stud.
Contains a 3M Clear, Colorless primer. Enough to prime the surface area for approximately 50 studs.
To use: Shake the pen well before using.
A gentle squeeze 1″ in from the felt tip, ruptures the inner membrane, allowing the contents to be easily dispensed.
Apply a thin, uniform coating to the bonding surface using the minimum amount that will fully coat the surface. Dries clear. Allow to dry thoroughly before applying the studs. This takes approximately 5 minutes at room temperature.
Extremely porous surfaces may need a second application for uniform coverage and good adhesion.
TIP: Make a template, cut-out to the same size as the stud.
This prevents wasting primer by only priming the area that the stud will bond to. **As with all primer type products, test on small area first to ensure it is compatible with surface.