90 Foot Length – RV Skirting Kit

$1,115.00 $945.00

90′ Kit includes:   …FREE SHIPPING…
– 90 Feet of EZ Snap® Premium RV Skirting
– 3 Height Options: 30, 46 or 60 inches tall
– 3 Snap Fastener Options
– 4 Colors Available: White, Black, Grey or Beige
– Gecko Velcro™ for one access point
– 1 FREE Removal Tool when one or more kits are ordered
**All Prices are in US funds**

Click Video Below for More Info

What Size Kit will I need? Try our Kit Size Calculator here…

296 in stock

SKU: 90 FOOT RV SKIRTING KIT Categories: , Tag:

90' Kit includes:   ...FREE SHIPPING...
- 90 Feet of EZ Snap® Premium RV Skirting
- 3 Height Options: 30, 46 or 60 inches tall
- 3 Snap Fastener Options
- 4 Colors Available: White, Black, Grey or Beige
- Gecko Velcro™ for one access point
- 1 FREE Removal Tool when one or more kits are ordered
**All Prices are in US funds**
** NOTE (Skirting Length): When inventory levels are low for the skirting color you ordered, EZ Snap® may supply your skirting length in 2 or 3 professionally joined sections using our Gecko Velcro™ (at no extra charge). This will give you one continuous length of skirting to work with, but with the added benefit of access points in the location of these joins.

Still Have Questions ?
Learn More Below

How to Install RV Skirting Video

What Size Kit will I need?

How Much Will It Cost?

Try our quick RV Skirting Kit Size Calculator Tool here… 

EZ Snap® Reviews

“The skirting is very high quality… Even with high winds it held up to the winter conditions.” Jason Halls

EZ Snap® Reviews

“What a GREAT product. Installation video is EXCELLENT!” Douglas

EZ Snap® Reviews

“…skirting really helped on heating costs when temperatures were below freezing. Heartily recommend the ezsnap products.” John King

EZ Snap® Reviews

“The skirt and snaps held up through a very cold winter with some severe wind storms and even then no snaps pulled off!” Jeanette Van Dijk

Place approximately 12 inches apart on the lens of the skylight.

AirFlo™ Spacers are recommended for all Dome Skylights or Skylights with Plastic Lens.

To use: Place the spacers approximately 12 inches apart or how every many
would be required to keep the mesh from laying on the skylight lens.

Why do we suggest the AirFlo Spacers: Many dome skylights are quality, "Made in America" skylights, but unfortunately there are
a lot of skylights on the market now that are made off-shore. In very hot weather, these poorly made skylight lens can develop crazing or imperfections in the
plastic of the skylight lens. This is caused by an excessive heat build-up in the sub-standard plastic lens.
The AirFlo™ spacers lift the shading mesh off of the lens of the skylight, allowing the excess heat to dissipate.

NOTE: Using AirFlo Spacers will slightly increase the size of the dimensions of the shading mesh you will need.

If you are confident that you have a quality built dome skylight, then these spacers
are probably not necessary for your project, but if you are unsure, better to be safe than sorry.

Outside View Black EZ Snap Shade Screens

OUTSIDE VIEW - BLACK EZ Snap Shade Screens.

INSIDE VIEW - BLACK EZ Snap Shade Screens

Outside View White EZ Snap Shade Screens

OUTSIDE VIEW - WHITE EZ Snap Shade Screens

Inside View White EZ Snap Shade Screens

INSIDE VIEW - WHITE EZ Snap Shade Screens

The Primer Pen is used for applications where it is necessary to increase the surface adhesion of the EZ Snap stud.

Contains a 3M Clear, Colorless primer. Enough to prime the surface area for approximately 50 studs.

To use: Shake the pen well before using.
A gentle squeeze 1″ in from the felt tip, ruptures the inner membrane, allowing the contents to be easily dispensed.
Apply a thin, uniform coating to the bonding surface using the minimum amount that will fully coat the surface.
Dries clear. Allow to dry thoroughly before applying the studs. This takes approximately 5 minutes at room temperature.
Extremely porous surfaces may need a second application for uniform coverage and good adhesion.

TIP: Make a template, cut-out to the same size as the stud.
This prevents wasting primer by only priming the area that the stud will bond to.
**As with all primer type products, test on small area first to ensure it is compatible with surface.

The Primer Pen is used for applications where it is necessary to increase the surface adhesion of the EZ Snap stud.

Contains a 3M Clear, Colorless primer. Enough to prime the surface area for approximately 50 studs.

To use: Shake the pen well before using.
A gentle squeeze 1″ in from the felt tip, ruptures the inner membrane, allowing the contents to be easily dispensed.
Apply a thin, uniform coating to the bonding surface using the minimum amount that will fully coat the surface.
Dries clear. Allow to dry thoroughly before applying the studs. This takes approximately 5 minutes at room temperature.
Extremely porous surfaces may need a second application for uniform coverage and good adhesion.

TIP: Make a template, cut-out to the same size as the stud.
This prevents wasting primer by only priming the area that the stud will bond to.
**As with all primer type products, test on small area first to ensure it is compatible with surface.