EZ Snap RV Skirting Featured On Keep Your Daydream

EZ Snap RV Skirting Featured On Keep Your Daydream

Window Shades
Skylight Shades
RV Skirting
RV Shades
Boat Shades

Here at EZ Snap we’re big fans of Marc and Tricia from Keep Your Daydream.

They’re a family of five that travel across North America in their RV and chronicle their adventures in videos and blog posts.

Recently, they did a great video full of helpful tips and products for winter camping in an RV and they featured EZ Snap RV Skirting as one of their essential items!

Watch the video to see the big difference EZ Snap RV Skirting made in the temperature underneath their RV.

You May Also Like...

New Invention -Cool your Boat or Yacht cabin without A/C

New Invention -Cool your Boat or Yacht cabin without A/C

This Innovative boat shade system features 3M® technology and provides 3 benefits in one. The EZ Snap® boat and yacht blinds and shading system has become one of the most popular and best-selling boating products in the last 5 years. This innovation provides boaters...

read more
Top 3 Ways to Shade Triangular or Arched Windows

Top 3 Ways to Shade Triangular or Arched Windows

Putting blinds or shades on triangular-shaped windows or arched windows can be expensive and difficult to do. Most typical blinds or shading products are designed to work with square or rectangular windows. Triangle-shaped windows are usually found on A-frame style...

read more

Follow this link to the EZ Snap® Blog...

FREE eBook...'How to Winterize Your RV'

FREE eBook...
'How to Winterize Your RV'

Your Guide for RV Winter Living & Storage.

Valuable Tips & Info help you prepare for cold weather. Includes winterization instructions for full-time or part-time winter RV living.

It's FREE and there's no obligation...
Download your copy today.

Thank You! You will be redirected to the eBook download page shortly... After you've had a read through, please let us know what you think about the 'How to Winterize Your RV' eBook.

Place approximately 12 inches apart on the lens of the skylight.

AirFlo™ Spacers are recommended for all Dome Skylights or Skylights with Plastic Lens.

To use: Place the spacers approximately 12 inches apart or how every many
would be required to keep the mesh from laying on the skylight lens.

Why do we suggest the AirFlo Spacers: Many dome skylights are quality, "Made in America" skylights, but unfortunately there are
a lot of skylights on the market now that are made off-shore. In very hot weather, these poorly made skylight lens can develop crazing or imperfections in the
plastic of the skylight lens. This is caused by an excessive heat build-up in the sub-standard plastic lens.
The AirFlo™ spacers lift the shading mesh off of the lens of the skylight, allowing the excess heat to dissipate.

NOTE: Using AirFlo Spacers will slightly increase the size of the dimensions of the shading mesh you will need.

If you are confident that you have a quality built dome skylight, then these spacers
are probably not necessary for your project, but if you are unsure, better to be safe than sorry.

Outside View Black EZ Snap Shade Screens

OUTSIDE VIEW - BLACK EZ Snap Shade Screens.

INSIDE VIEW - BLACK EZ Snap Shade Screens

Outside View White EZ Snap Shade Screens

OUTSIDE VIEW - WHITE EZ Snap Shade Screens

Inside View White EZ Snap Shade Screens

INSIDE VIEW - WHITE EZ Snap Shade Screens

The Primer Pen is used for applications where it is necessary to increase the surface adhesion of the EZ Snap stud.

Contains a 3M Clear, Colorless primer. Enough to prime the surface area for approximately 50 studs.

To use: Shake the pen well before using.
A gentle squeeze 1″ in from the felt tip, ruptures the inner membrane, allowing the contents to be easily dispensed.
Apply a thin, uniform coating to the bonding surface using the minimum amount that will fully coat the surface.
Dries clear. Allow to dry thoroughly before applying the studs. This takes approximately 5 minutes at room temperature.
Extremely porous surfaces may need a second application for uniform coverage and good adhesion.

TIP: Make a template, cut-out to the same size as the stud.
This prevents wasting primer by only priming the area that the stud will bond to.
**As with all primer type products, test on small area first to ensure it is compatible with surface.