New Invention -Cool your Boat or Yacht cabin without A/C

New Invention -Cool your Boat or Yacht cabin without A/C

This Innovative boat shade system features 3M® technology and provides 3 benefits in one.

The EZ Snap® boat and yacht blinds and shading system has become one of the most popular and best-selling boating products in the last 5 years. This innovation provides boaters with 3 great benefits out of one low-cost product.

First, the EZ Snap shading mesh blocks up 90% of the sun’s heat, without blocking the view. Secondly, it also blocks up to 90% of the U.V. damage caused by the sun on boat upholstery and marine gauges, and last, but not least, it provides daytime privacy when moored in the marina or yacht club.

This patented shading system features the EZ Snap® non-fray solar shading mesh. This mesh can be “cut-to-size” right on-site for a perfect fit every time. Fits all types and sizes of boats, yachts, and sailboats. Boaters also love the “No Drill” EZ Snap® fasteners, featuring a very strong 3M peel and stick VHB adhesive.
No more drilling into the expensive hull of your vessel.

1. Block 90% of the sun’s heat, without blocking your view from the cabin of your boat.

The innovative shading EZ Snap® shading mesh is an optical grade which means it will not distort your view as you look through it. These shades come in either a black or a white color. We recommend white for boats or yachts if you are looking for the maximum amount of heating blocking and the most interior privacy when moored. The black color shades are easier to see through and do not stop as much heat from building up in the boat’s cabin, especially if you only have single-pane glass on your cabin.

 

Heat blocking boat window shades and blinds | Sailboat Window Shades by EZSnapDirect.com

2. Protect your yacht’s interior from UV damage and stop fading of your boat’s upholstery.

UV damage to the interior of your boat is one of the most expensive and frustrating problems boaters face. This problem is even worst in sunny locations like Florida, Texas, or California. 

The EZ Snap® shading mesh is designed to stop up to 90% of the full spectrum of the sun’s damaging rays. This basically means in simple math, that you are also going to stop up to 90% of the UV damage to the upholstery fabric in the boat’s cabin and marine gauges. 

 

3. Day-time privacy window blinds for your boat when moored.

Along with making your boat’s cabin cooler and stoping UV damage to your yacht’s interior, you get the added benefit of reducing the fishbowl effect when you’re moored in the marina. 

You will be able to see clearly out of your cabin windows, but people on the dock around you will not be able to see clearly in. This not only reduces prying eyes from casing out items in your boat but provides a sense of privacy from all the boating walking to and from their boats in a yacht club or boat marina setting.

Yacht shades and boat blinds for daytime privacy in boat marina or yacht club moorage.

3D Animation of the EZ Snap Fastener System in Action.

This animation shows how the different EZ Snap parts fit together.

This boat Shade Sunscreen animation shows how easy it is to fashion your own exterior boat solar shades on your boat or yacht windows.

This animation first shows the “Peel and Stick” 3M Adhesive Snaps attaching to a large cabin cruiser yacht, then the EZ Snap pin, followed by the EZ Snap Thermo Weave shade cloth. And finally, it is all held in place by the color matching locking cap.

You May Also Like...

Top 3 Ways to Shade Triangular or Arched Windows

Top 3 Ways to Shade Triangular or Arched Windows

Putting blinds or shades on triangular-shaped windows or arched windows can be expensive and difficult to do. Most typical blinds or shading products are designed to work with square or rectangular windows. Triangle-shaped windows are usually found on A-frame style...

read more
How Does RV Skirting Work?

How Does RV Skirting Work?

How does RV skirting work? RV skirting keeps the undercarriage of an RV warm by sealing it off from the outside air. Once the air underneath an RV is contained it can be heated, which is what protects the pipes and …

read more

Follow this link to the EZ Snap® Blog...

Place approximately 12 inches apart on the lens of the skylight.

AirFlo™ Spacers are recommended for all Dome Skylights or Skylights with Plastic Lens.

To use: Place the spacers approximately 12 inches apart or how every many
would be required to keep the mesh from laying on the skylight lens.

Why do we suggest the AirFlo Spacers: Many dome skylights are quality, "Made in America" skylights, but unfortunately there are
a lot of skylights on the market now that are made off-shore. In very hot weather, these poorly made skylight lens can develop crazing or imperfections in the
plastic of the skylight lens. This is caused by an excessive heat build-up in the sub-standard plastic lens.
The AirFlo™ spacers lift the shading mesh off of the lens of the skylight, allowing the excess heat to dissipate.

NOTE: Using AirFlo Spacers will slightly increase the size of the dimensions of the shading mesh you will need.

If you are confident that you have a quality built dome skylight, then these spacers
are probably not necessary for your project, but if you are unsure, better to be safe than sorry.

Outside View Black EZ Snap Shade Screens

OUTSIDE VIEW - BLACK EZ Snap Shade Screens.

INSIDE VIEW - BLACK EZ Snap Shade Screens

Outside View White EZ Snap Shade Screens

OUTSIDE VIEW - WHITE EZ Snap Shade Screens

Inside View White EZ Snap Shade Screens

INSIDE VIEW - WHITE EZ Snap Shade Screens

The Primer Pen is used for applications where it is necessary to increase the surface adhesion of the EZ Snap stud.

Contains a 3M Clear, Colorless primer. Enough to prime the surface area for approximately 50 studs.

To use: Shake the pen well before using.
A gentle squeeze 1″ in from the felt tip, ruptures the inner membrane, allowing the contents to be easily dispensed.
Apply a thin, uniform coating to the bonding surface using the minimum amount that will fully coat the surface.
Dries clear. Allow to dry thoroughly before applying the studs. This takes approximately 5 minutes at room temperature.
Extremely porous surfaces may need a second application for uniform coverage and good adhesion.

TIP: Make a template, cut-out to the same size as the stud.
This prevents wasting primer by only priming the area that the stud will bond to.
**As with all primer type products, test on small area first to ensure it is compatible with surface.